How to setup FaxTalk FaxCenter Pro for network faxing.

For detailed information on setting up FaxTalk FaxCenter Pro and FaxTalk Multiline Server to perform network faxing, please see the FaxTalk support area.

As a courtesy, the following few steps will guide you through the easy setup of network faxing.

To setup the server, follow the following steps:

1. Launch FaxTalk Multiline Server on your server computer.
2. Click the Tools, Options menu.
3. Select the Network Fax item in the left-hand tree list.
4. Check the box titled: "Enable network fax server"
5. Specify the Port, 1234 is the default.
6. Click OK.  The fax server is now ready to accept communications from clients.

To setup the clients, follow the following steps:

1. Launch FaxTalk FaxCenter Pro on the client computer(s).
2. Click the Tools, Options menu.
3. Select the Network Fax item in the left-hand tree list.
4. Select the checkbox, "Enable network fax client mode"
5. Enter the IP address of the server, the below example, 192.168.1.95 is used.
6. Enter the Port of the fax server from step 5 in the previous section.  In this case, 1234.
7. Click OK.  The fax client will now send faxes through the fax server.
8. Please note that if you previously used a modem on the client, you will need to click the Modem section and disable the modem.